Dry machine construction and its frame made of stainless steel. Moving table also made of stainless steel and plastic. The tape moves the product through the so-called tunnel, in order to blow water off the product. In the machine, there are two blowers — top and bottom, optimizing blowing water off the product. The table driven by a motor with a reducer. The speed of the table smoothly adjusted using a potentiometer located on the front panel, on the inlet side of the machine. The panel also has the On/Off button and a dial for adjusting the height of nozzles located above the belt. The adjustment range is 10-200 mm above the conveyor belt level. This regulation is intended to increase the effectiveness of drying. In addition, there is a power socket mounted behind the machine for the optional conveyor. The employee protected against power failure by means of a circuit breaker.