Secadora compatible con tanque retráctil automático
Secadora compatible con tanque retráctil automático
El secador automático es una parte integral de la línea de envasado de papel retráctil. Cuando el producto se envasa al vacío en retráctil y luego se envuelve de la misma manera, el siguiente paso es secar el producto para que pueda ser etiquetado inmediatamente sin romper el ciclo de envasado.
Dry machine construction and its frame made of stainless steel. Moving table also made of stainless steel and plastic. The tape moves the product through the so-called tunnel, in order to blow water off the product. In the machine, there are two blowers — top and bottom, optimizing blowing water off the product. The table driven by a motor with a reducer. The speed of the table smoothly adjusted using a potentiometer located on the front panel, on the inlet side of the machine. The panel also has the On/Off button and a dial for adjusting the height of nozzles located above the belt. The adjustment range is 10-200 mm above the conveyor belt level. This regulation is intended to increase the effectiveness of drying. In addition, there is a power socket mounted behind the machine for the optional conveyor. The employee protected against power failure by means of a circuit breaker.
